ISO 9001 & ISO 13485 Certified Tangxia, Dongguan · China

Screws, Bolts & Fasteners

Machine screws · bolts · special fasteners

Steel · Stainless HardwareIndustrial

Catalogues cover the standard sizes and stop. The fasteners that cause trouble are the ones that are 3 mm too long, need a shoulder where nobody puts one, or have to be in a material the catalogue does not stock. Those are turned parts, and they are the ones we make.

We produce machine screws, bolts, threaded studs and special fasteners from steel, stainless steel and brass, with threads cut or rolled to the form you specify and heads turned to your drawing rather than to a standard.

Fasteners We Turn

Machine screwsSlotted, hex and knurled heads, to your drawing or to a standard form.
Bolts and set screwsIncluding non-standard lengths and shoulder geometry.
Shoulder and captive screwsTurned with a controlled shoulder diameter and undercut.
Threaded studsSingle- and double-ended, with chamfered or dog-pointed ends.
Thumb screws and knurled nutsFor hand-tightened applications.
Threaded spacers and standoffsMale/female or female/female, cut to length.

Fastener Specification

Thread formsMetric, UNC/UNF, BSP and custom profiles — matched to the mating part you specify
Thread productionCut or rolled, depending on the material and the volume
Machining tolerance±0.01 mm standard, held on the dimensions you mark as critical
Head formsPer your drawing: slotted, hex, knurled, or a shape we will help you simplify
MaterialsCarbon steel 20#/45#/12L14 · stainless 303/304/316 · brass C3604/H62 · aluminum
Surface finishingZinc and nickel plating, blackening, passivation, sandblasting, PVD
VolumePrototypes from 5 pcs · MOQ 100 pcs per part number · high volumes on simple parts

Two details worth settling before you order

The thread. A fastener is only correct relative to the part it goes into. Give us the mating thread or the tapped hole specification and we will match it, including the tolerance class. This single detail prevents the most common fastener problem, which is a screw that threads by hand and fails a torque test.

The strength requirement. Property class matters for anything that carries load or will be torqued repeatedly. Tell us the class or the load, and we will recommend the material and heat treatment rather than defaulting to something that machines nicely and fails in service.

Non-standard head shapes are usually a cost, not a feature. If a head has to look a particular way, keep it. But if the shape exists only because that is how the original part was drawn, a small change can make the part considerably cheaper to turn. We will tell you which of the two you have.

Screws, Bolts & Fasteners — Common Questions

Can you match a thread to a part you have not seen?
Give us the mating thread or tapped hole specification and the tolerance class, and we will machine and gauge to it. If you can send the mating part, that is better still.
Do you make non-standard head shapes?
Yes, turned to your drawing. Where a simpler head would do the same job, we will say so — but the drawing is the drawing.
What is the minimum order quantity?
100 pcs per part number, with prototypes from 5 pcs so you can test the thread and the fit first.
Which material should I choose?
Carbon steel for strength and cost, stainless 303 or 304 where corrosion matters, and brass for electrical or decorative applications. Tell us the load and the environment and we will recommend one.
Can the parts be plated?
Yes — zinc, nickel, blackening, passivation and PVD are all arranged to your specification.
Have a part drawing? Get a quote within one working day. Send a STEP, DWG, DXF or PDF file — or post us a sample. You will hear back from the engineers who will actually make the part. Request a Quote →