Springs are a small part of what we run, and this page says so rather than pretending otherwise. We are a turned-parts factory: the bulk of our work is inserts, nuts, shafts, washers, bushings and non-standard parts. Springs come up alongside that work, usually because a customer needs a few thousand of them and would rather buy the whole assembly from one supplier than place a second order.
For simple compression springs, coils and wire forms, we are happy to quote. For anything that depends on precise load rates, fatigue life or tight spring-back tolerances, a dedicated spring maker with purpose-built coiling equipment is the right supplier — and we would rather tell you that at the quotation stage than take an order we cannot make well.
What We Can Quote
Where we are the wrong supplier
Being clear about this saves both of us time. We are not the right choice when:
· the spring has a specified load or rate that has to be held within a tight band;
· the application needs a documented fatigue life or a high cycle count;
· the part needs grinding, shot-peening or preset operations;
· the volume is very high, where dedicated coiling equipment wins on both price and consistency;
· the geometry is anything other than a straightforward coil or wire form.
If your requirement falls into one of those, say so and we will tell you straight away — there is no benefit to either of us in quoting work that belongs with a specialist.
Spring Enquiry — What to Send
| Wire diameter | The wire size the part is coiled from |
|---|---|
| Outside or inside diameter | Whichever your design is based on |
| Free length | The unloaded length of the spring |
| Solid height | The fully compressed length, if it matters |
| Number of coils and ends | Closed, open, ground or plain ends |
| Load requirement | State it if you have one — and tell us how tight it is, since that is what decides whether we are the right supplier |
| Material | Spring steel, stainless, or the grade on your drawing |
| Quantity | Per order and per year — the annual figure decides whether this belongs with us or a specialist |


