Catalogues cover the standard sizes and stop. The fasteners that cause trouble are the ones that are 3 mm too long, need a shoulder where nobody puts one, or have to be in a material the catalogue does not stock. Those are turned parts, and they are the ones we make.
We produce machine screws, bolts, threaded studs and special fasteners from steel, stainless steel and brass, with threads cut or rolled to the form you specify and heads turned to your drawing rather than to a standard.
Fasteners We Turn
Fastener Specification
| Thread forms | Metric, UNC/UNF, BSP and custom profiles — matched to the mating part you specify |
|---|---|
| Thread production | Cut or rolled, depending on the material and the volume |
| Machining tolerance | ±0.01 mm standard, held on the dimensions you mark as critical |
| Head forms | Per your drawing: slotted, hex, knurled, or a shape we will help you simplify |
| Materials | Carbon steel 20#/45#/12L14 · stainless 303/304/316 · brass C3604/H62 · aluminum |
| Surface finishing | Zinc and nickel plating, blackening, passivation, sandblasting, PVD |
| Volume | Prototypes from 5 pcs · MOQ 100 pcs per part number · high volumes on simple parts |
Two details worth settling before you order
The thread. A fastener is only correct relative to the part it goes into. Give us the mating thread or the tapped hole specification and we will match it, including the tolerance class. This single detail prevents the most common fastener problem, which is a screw that threads by hand and fails a torque test.
The strength requirement. Property class matters for anything that carries load or will be torqued repeatedly. Tell us the class or the load, and we will recommend the material and heat treatment rather than defaulting to something that machines nicely and fails in service.


