ISO 9001 & ISO 13485 Certified Tangxia, Dongguan · China

Plastic & Non-metal Parts

Machined plastics — knobs, spacers, insulators, housings

POM · Nylon · PTFE ElectronicsMedical

Plastics machine differently from metal, and the difference is not just feeds and speeds. They move with temperature, they spring back off a cutting edge, they can chip at a sharp corner, and a tolerance that is routine in brass can be genuinely difficult in PEEK.

We machine engineering plastics on our CNC milling and engraving machines: POM-C, PA6 nylon, PEEK, PTFE and ABS in the sizes and shapes you need. Both of our certificates cover the turned-part side of the business, so plastic parts destined for an electronics or medical assembly sit inside the same quality system as the metal ones.

Plastic Parts We Machine

Insulators and spacersElectrically insulating parts with controlled thickness.
Knobs and handlesKnurled, slotted or threaded for hand operation.
Bushings and wear partsLow-friction parts in POM-C and PTFE.
Housings and coversMilled pockets, slots and cutouts.
Seals, gaskets and washersCut from sheet or machined from bar in PTFE and nylon.
Medical and lab componentsNon-implant parts, within the ISO 13485 scope we hold.

Plastic Machining Specification

MaterialsPOM-C · PA6 nylon · PEEK · PTFE · ABS — tell us the grade and we will confirm feasibility
ProcessCNC milling and engraving machines; turned plastic parts on the lathes
Machining tolerance±0.01 mm on metal parts; for plastics the achievable tolerance depends on the material, the wall section and the temperature the part will see — we quote it per part
Thermal behaviourPlastics expand considerably more than metals — tolerances are quoted with the service temperature in mind, not just at 20 °C
FinishingDeburred and de-flashed; no tumbling that would mark soft material
VolumePrototypes from 5 pcs · MOQ 100 pcs per part number

We machine plastics — we do not mould them

Worth saying plainly, because the two get confused: we machine plastic parts from bar, sheet and tube. We do not injection-mould, and we do not make moulds. For prototype quantities and for parts with modest volumes, machining is usually the faster and cheaper route, and there is no tooling cost to write off. Above a certain volume a moulded part wins on unit price — if we think you are in that territory, we will say so, even though it means we do not get the work.

Name the grade, not just "plastic". “Plastic” leaves a decision open that changes both the price and the performance. POM-C machines cleanly and is the usual choice for mechanical parts; PA6 is tougher and absorbs impact; PEEK takes heat and keeps its strength; PTFE is chemically inert and low-friction; ABS is inexpensive and easy to machine. Tell us what the part has to survive and we will recommend one.

Plastic Parts — Common Questions

Which plastic grades do you machine?
POM-C, PA6 nylon, PEEK, PTFE and ABS are grades we run regularly. Send the grade on your drawing and we will confirm before quoting.
Can you hold ±0.01 mm on plastic parts?
On metal parts ±0.01 mm is our standard. On plastics the achievable tolerance depends on the material, the section and the service temperature, so we quote it per part rather than promise a blanket number.
Do you injection-mould parts?
No — we machine plastic from bar, sheet and tube, and we do not make moulds. For prototypes and modest volumes that is usually the cheaper route; at high volumes we will tell you honestly that a moulded part would beat us on price.
Can plastic parts be supplied under your ISO certificates?
Our ISO 9001:2015 and ISO 13485:2016 certificates cover turn-machined hardware. Tell us the application and the standard it falls under, and we will confirm what we can and cannot certify before you order.
What is the minimum order quantity?
100 pcs per part number, with prototypes from 5 pcs.
Have a part drawing? Get a quote within one working day. Send a STEP, DWG, DXF or PDF file — or post us a sample. You will hear back from the engineers who will actually make the part. Request a Quote →