ISO 9001 & ISO 13485 Certified Tangxia, Dongguan · China

Brass Threaded Inserts & Nuts

Knurled inserts · molded-in nuts · threaded spacers

Brass · Copper ElectronicsAutomotive

Brass inserts are one of the two things we run in the largest volume. They are turned from C3604, H62 and H59 bar, threaded, knurled where the insert has to grip plastic, and shipped deburred and ready to mold in or press in.

The volume question is what makes this category worth asking about. A simple turned brass part — a threaded nut, a spacer, a knurled insert — runs on our automatic lathes and comes off in the millions per month. If your annual volume is in the tens of thousands rather than the millions, we will still quote it honestly and run it on the machine that makes sense, but it is worth telling us the volume up front because it changes which process we would choose.

Brass Parts We Turn

Knurled insertsStraight and diamond knurl for molded-in and press-fit applications.
Molded-in nutsInsert-molded into plastic housings; no post-assembly operation needed.
Threaded spacersMale/female standoffs cut to length with square, deburred ends.
Hex and round nutsStandard or non-standard across-flats, with chamfered leads.
Threaded bosses & adaptersTurned bodies with internal and external threads.
Custom brass fittingsCross-drilled, slotted or milled as a secondary operation.

Threading & Specification

Thread formsMetric, UNC/UNF, BSP and custom profiles — tell us the mating part and we will match it
Thread inspectionGo/no-go gauges; thread depth and runout checked against your drawing
Machining diameterØ1–40 mm daily range, up to Ø46 mm by process review
Machining tolerance±0.01 mm standard, on the dimensions you mark as critical
MaterialsC3604 (free-cutting) · H62 · H59 — plus bronze and copper where the application needs them
Surface finishRa 1.6 as standard; nickel, tin and zinc plating available
DeburringParts are deburred — no sharp thread leads or knurl edges left on the part
VolumePrototypes from 5 pcs · MOQ 100 pcs per part number · 1,000,000+ pcs/month on simple turned parts

Which brass grade you want, and why we will ask

C3604 is the free-cutting grade and the cheapest to machine — it machines cleanly at high speed, which is why it dominates insert and nut work. H62 and H59 are stronger and better where the part sees mechanical load, or where the application will not accept the lead content of C3604. If your drawing just says “brass”, tell us what the part has to do and we will recommend a grade rather than guessing.

Tell us the mating thread. A thread is only correct in relation to what screws into it. Give us the mating bolt, the plastic you are molding into, or the tolerance class you need — that single detail prevents the most common insert problem, which is a thread that is nominally right and functionally loose.

Brass Inserts & Nuts — Common Questions

What is your MOQ on brass inserts?
100 pcs per part number. For a new design we will run 5–20 pcs first so you can mold or press one in and check the fit before committing to volume.
Can you run high volumes?
Yes. Simple turned parts such as brass nuts and inserts run to 1,000,000+ pcs per month on our automatic lathes. Give us the annual volume and we will quote against the right process.
Can you make a non-standard thread?
Yes — metric, UNC/UNF, BSP and custom profiles. Send the mating part or the thread specification and we will confirm before quoting.
Do you knurl to my specification?
Straight or diamond knurl, to the pitch and diameter you need. Tell us the plastic and the pull-out force you are designing for and we will suggest the knurl that suits it.
Will the parts need deburring after molding?
No. Parting burrs and thread leads are removed before shipping, so inserts go straight into the molding machine.
Have a part drawing? Get a quote within one working day. Send a STEP, DWG, DXF or PDF file — or post us a sample. You will hear back from the engineers who will actually make the part. Request a Quote →