ISO 9001 & ISO 13485 Certified Tangxia, Dongguan · China

Custom & Non-standard Parts

From your drawing or sample — one-off to mass production

All machinable materials PrototypingIndustrial

This is the work we are built for. Most of the parts we ship are not catalogue items — they are a drawing a customer sent us, a sample in a padded envelope, or a rough sketch that needed an engineer to turn it into something manufacturable.

Non-standard parts are where a factory either helps you or quietly costs you money. We keep engineers on staff whose job is to read your print before we quote: whether the tolerances are achievable, whether a thin wall will distort, whether a cross-hole will break into a thread, whether a cheaper process would do the same job, and whether anything in the drawing makes the part expensive for no good reason.

What "non-standard" usually means

No catalogue equivalentThe part is defined by your drawing, not by a product number.
Unusual geometryGrooves, steps, cross-holes, flats, knurls and threads combined on one part.
Non-standard materialA grade we do not run every day, or material you supply yourself.
Awkward tolerancesA dimension that needs a conversation about what is achievable at a sensible cost.
Prototype to production5 pcs to validate the design, then 50,000 pcs on the same machines.
Obsolete or one-off partsSomething nobody makes any more, reverse-engineered from a worn sample.

How a non-standard part gets quoted

  1. Send the drawing or sampleSTEP, IGES, DWG, DXF, PDF — or post the physical sample. A sketch with key dimensions works too.
  2. Engineering review (DFM)We read it for manufacturability before pricing: critical dimensions, the tightest tolerance, features that will be fragile or costly, and any decision the drawing leaves open.
  3. Feedback and optionsYou get our questions back, plus alternatives where they exist — a different material, a looser tolerance on a non-critical dimension, a different process route.
  4. Quote within one working dayWith lead time, MOQ and the process we would run. Parts needing a full DFM review take 1–2 working days. No charge for the review, no obligation to order.
  5. First article and approvalSamples in about 7 working days, with the first-article report kept on file so production matches what you approved.
  6. ProductionAbout 30 working days, confirmed per project once we see the part.

Non-standard Capability at a Glance

Machining tolerance±0.01 mm standard, held on the dimensions you mark as critical
Machining diameterØ1–40 mm daily range, up to Ø46 mm by process review
Max workpiece length1.5 m on the horizontal lathes
Processes in one factoryCNC turning · turn-mill compound · Swiss-type turning · automatic lathe · milling & engraving · stamping & punching
MaterialsBrass C3604/H62/H59 · stainless 303/304/316 · carbon steel 20#/45#/12L14 · aluminum 6061-T6/6063/7075 · POM-C, PA6, PEEK, PTFE, ABS — plus customer-supplied material
QuantitiesPrototypes from 5 pcs · MOQ 100 pcs per part number · simple turned parts up to 1,000,000+ pcs per month
Files we acceptSTEP, IGES, STL, DWG, DXF, PDF, or a physical sample
Inspection we can provideDimensional report · first-article inspection (FAI) · material certificate · salt-spray test · hardness test
Inspection we cannot provideThird-party coordinate-measuring (CMM) reports — if your quality plan requires one, we will tell you before you order

What is different about sending it to the factory

We are not a trading company and not a broker network. There is no intermediary deciding which shop gets your job, and the engineer who reviews your drawing works in the same building as the machines that will run it. That matters most on exactly this kind of part: when something in the print needs explaining, the answer comes from someone who can walk over and look at the setup.

It also means we say no when a job is the wrong fit. If a part needs a process we do not run, or a tolerance that belongs on a grinder rather than a lathe, you will hear that before you order — not after.

Send the drawing even if it is not finished yet. Drawing review is free, and we will tell you what we would change. A part that is hard to machine is usually easy to fix on paper — and far cheaper to fix before tooling than after.

Custom & Non-standard Parts — Common Questions

Can you make a part if I only have a physical sample and no drawing?
Yes. Post us the sample; we measure it, build the drawing, and send it back for approval before quoting production. If the sample is worn, tell us which features are meant to be tight and we will work to those.
What is the smallest quantity you will accept?
Prototypes from 5 pcs. Standard MOQ is 100 pcs per part number, and you are welcome to start with a prototype batch and scale up once you have tested the part.
Do you sign NDAs?
Yes — we sign NDAs on request before you send drawings. Send us yours, or ask for ours.
Will you tell me if my design is difficult to manufacture?
That is the point of the review. You get the specific features driving cost or risk, and what a workable alternative looks like, usually within one working day.
Do you charge for quoting or DFM feedback?
No. Drawing review and quoting are free, and there is no obligation to place an order.
Do you handle both one-offs and mass production?
Yes, and on the same equipment. The machines and operators that make your prototype are the ones that run the production order, which is why the parts match.
Have a part drawing? Get a quote within one working day. Send a STEP, DWG, DXF or PDF file — or post us a sample. You will hear back from the engineers who will actually make the part. Request a Quote →